K800i totaly broken

[Milosh911]

I bought not working- white screen flashing k800i, and after trying to unlock it with far i got this:
xss++ log:
13:43:15| XS++ v3.1 (Darwin) Ready !
13:43:22|
13:43:22| Attempting to open the interface...
13:43:22|
13:43:22| TURN OFF PHONE!
13:43:22| Hold 'C' button on phone and connect phone NOW.
13:43:22| You have 30 seconds...
13:43:22|
13:43:29| Baseband ID: 9900
13:43:29| Protocol Version: 3.1
13:43:29| Warning: IMEI name does not match GDFS name (IMEI:K800 GDFS:K700)
13:43:29| ...using IMEI name
13:43:29|
13:43:29| Profiling SEMC phone...
13:43:29| Platform: DB2020
13:43:29| OTP CID: 49
13:43:29| EROM CID: 53
13:43:29| EROM Color: Red
13:43:29| IMEI: 35342701xxxxxx
13:43:29| Phone ID: K800
13:43:29| Region: S_E_EUROPE
13:43:29| CDA: CDA102511/2 R2A
13:43:29| Firmware Version: R8BF003
13:43:29| EROM: R3A022
13:43:29| Ready for operation!
setool2lite log:
Welcome to SEtool2 ( LITE edition ) v 1.10
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:53
Speed:921600
Flash ID check:2019
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35342701688326 CERT:RED
FLASH CID:53 COLOR:RED

Model:K700
MAPP CXC article: R8BF003 prgCXC1250210_GENERIC_WI
MAPP CXC version: R8BF003
Language Package:S_E_EUROPE
CDA article: CDA102511/2
CDA version: R2A
Default article: cxc1250490
Default version: R8BF003

Operator: 000-00

Elapsed:13 secs.


Help please.

[karrlren]

there is sumthing wrong
with your process in flashing
ur system.. have u did
crossflashing with ur unit
to another firmwaare?

[Milosh911]

I followed this tutorial Flash K800 CID53 with K810 software CID53 (for begginers)

[riders4sia]

first try changing LCD and keypad membrane, if still not working you need to repair the GDFS

[robyerto27]

hi guys, yes it happened to me this problem with white flash display, but after i change the screen, everything was normal, working fine now, i don't no how, my old screen working good with the k800 firmware but white flash with k810 firmware, so in this way i solved the problem: change the screen and if you are lucky your phone will work again normally. it's not a specifically tipe of screen just another screen for k800. i hope to not be problems with the your gdfs. good luck.

[JasperSharp]

Can someone help me??? My phone is SIM locked to Telfort and I have CID53. I do all that you said here,install firmware and all the rest,but it still LOCKED to Telfort! When my phone turn on i get the message INSERT CORRECT SIM CARD! What should I do..