Results 1 to 1 of 1
  1. #1
    Recently Initiate zeropra's Avatar
    Join Date
    Aug 2009
    Device
    -w530i
    Posts
    15
    Thanks
    0
    Thanked 1 Time in 1 Post

    Red face ELF's short tutorial for c510

    hai guys am back with some tips for installing elves pack in your phone:

    1) convert ur phone's certificate from red to brown certificate :

    *buy omnius license for converting fw replace certificate .

    2)after u have converted ur phone to brown -"Developer" backup ur fs using the below file..

    *a2_fs_backup.txt

    *open the A2uploader and in MISC Files Field: locate the file from the Archive.
    *Then press write the a2uploader will ask for the phone to connect...then connect the phone wala after a 15min. u can get the fs as backup..

    ELF installing steps
    3)now we have create the following folders in the PHONE memory and MEMORY stick
    *In phone memory
    1)create folders in phone memory->others -->Zbin and Ini (separate folders).
    2)now create two new folders named -->Config and DLL inside the Zbin folder tat u previously created.
    Here is the A2Elfs pack link---->A2ELF's Library and this is another one A2elf pack --->JUST_DAn_PO homepage
    3)here in Config folder u have place the DYN_CONST.bin file. here is the download link -->JUST_DAn_PO homepage .
    4)In the DLL folder place the LibraryDLL.dll file here. here is the download link--->JUST_DAn_PO homepage

    * In Memory stick
    1)create folders in phone memory->others -->Zbin.
    2)create two folders inside Zbin-->Config and Daemons (separate folders)

    after creating folders follows these steps:

    4)now download the software for patching which will make the ELF to work in ur mobile..
    search in our forum software downloads --->Far20b1263.x86.20091204 used for cxc patching
    * by using this software u have to patch the 1)phone_app.cxc 2)phone_emp_app.cxc which will inside the boot folder in the fs

    *so take a backup of those files,now open the phone_app.cxc using the Far20b1263.x86.20091204 used for cxc patcher software as u did in jdflasher-farmanger
    there will be two frames open the phone_app.cxc file in the left frame and at first it will be empty then choose the following files and copy in init.
    1)C510_R1HA035.app.vkp
    2)c510_r1ha035.lib.vkp
    --->Here is the Library file for Elf's latest library-->svn : SonyEricsson

    **If u want to install a running elf which will initial work right from the time u start the phone u have to copy the
    C510_R1HA035_Elfloader.vkp along with the above given files ...Here is the link Elf'sloader-->Elf catalogue - SE-NSE Forums
    save the patch by clicking on the (...) given above the files it will be saved..
    Note:
    The Elf's loader is the .Elf file tat which u want to install in ur phone. so for the User dependent elf's (the elf's file is the elf's loader file) so u dont need to install elsf's loader file for it. but when u have an Elf's which starts at the phone(ON) operation surely requires Elf's loader patch which should be applied to the same phone_app.cxc which u have patched before, so dont forget .
    user dependent elf no elf loader=as it is elf'loader and independent Elf's = require elfloader, i.e
    *Then open the phone_emp_app.cxc file using the same Far20b1263.x86.20091204 used for cxc patcher software and follow the same procedure but now u have copy the C510_R1HA035.emp_app.vkp from the left to the right ..and click on the (...) above the .vkp file to save it.

    installing Elf's:
    5)search for the elf's which u want to install and collect the .elf files separately in a folder .
    *if the elf tat u want to install has any patches means...open the same phone_app.cxc file which u have patched before using the Far20b1263.x86.20091204 used for cxc patcher software then copy all those files in it (right to left) and save it by pressing (...) .
    *The patch tat u have needs u to open it every time to execute it(i.e-User dependent) .then create a folder in the Memory stick-->others-->/create elf's folder and copy tat elf file init
    **if u have a elf which will start to execute from the time u start(ON) the phone(independent) ,u need to copy the elf to the Memory stick-->others-->Zbin-->(place ur .elf file inside here)

    6)Caution:
    never put ur elf in phone memory-->Zbin as some elf are bad and as a result ur phone will not ON sometime but dont worry if u remove the memory stick it will become normal ...so ALWAYS copy them to
    MEMORY STICK-->others-->Zbin-->(ur .elf file inside here)


    enjoy
    Last edited by zeropra; 12-28-2010 at 04:17 AM. Reason: links where showing up even for unlogged guest

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •