Results 1 to 7 of 7
  1. #1
    Recently Initiate
    Join Date
    Sep 2009
    Device
    -
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Question w810i help needed

    System diagnostics passed.
    Version 13.21 ready!

    [ --- Attach to Phone --- ]
    Connecting via Interceptor USB Cable...
    Powering on the phone...
    Baseband chip ID: 0x8040
    Protocol version: 3.1
    Baudrate = 460800Bd
    Booting via ROM...
    Sony Ericsson phone detected.
    Phone CID: 49
    Phone color: Red
    Flash certificate: A1_DB2010_49_RED
    Trying Red CID49 flash applet...
    Sending applet prologue...
    Sending applet body...
    Time spent entering bootstrap: 1s
    Initializing phone hardware...
    Applet ID: 060206 1814 NPACXC125872_COMPACTPRO...
    Flash manufacturer: Intel
    Flash ID: 0x897E
    OTP Security Level: 1 (Retail)
    OTP CID: 49


    Sending applet...
    Applet ID: 061204 1528 HAN_DB2010_FLASHLOADER_...
    RSA protection state cannot be determined for this CID.
    Phone hardware initialized OK

    [ --- Unlock RSA --- ]
    Preparing to program flash...
    Baudrate = 921600Bd
    The applet ignored baudrate change request!
    Programming flash...
    Time: 00:00:01
    Flash process done.
    Phone automatically detached.

    [ --- Attach to Phone --- ]
    Connecting via Interceptor USB Cable...
    Powering on the phone...
    Baseband chip ID: 0x8040
    Protocol version: 3.1
    Baudrate = 460800Bd
    Booting via ROM...
    Sony Ericsson phone detected.
    Phone CID: 49
    Phone color: Red
    Flash certificate: A1_DB2010_49_RED
    Trying Red CID49 flash applet...
    Sending applet prologue...
    Sending applet body...
    Time spent entering bootstrap: 1s
    Initializing phone hardware...
    Applet ID: 060206 1814 NPACXC125872_COMPACTPRO...
    Flash manufacturer: Intel
    Flash ID: 0x897E
    OTP Security Level: 1 (Retail)
    OTP CID: 49


    Sending applet...
    Applet ID: 061204 1528 HAN_DB2010_FLASHLOADER_...
    RSA protection state cannot be determined for this CID.
    Phone hardware initialized OK

    [ --- Flash Main Firmware --- ]
    Flash file: "W810_R4EA031_MAIN_HONG_KONG_HN_RED49.mbn"
    Waiting for flash file to load...
    Preparing to program flash...
    Baudrate = 921600Bd
    The applet ignored baudrate change request!
    Programming flash...
    Time: 00:09:22
    Flash process done.

    [ --- Flash Raw File System --- ]
    Flash file: "W810_R4ED001_FS_HONG_KONG_RED49.fbn"
    Waiting for flash file to load...
    Preparing to program flash...
    Baudrate = 921600Bd
    The applet ignored baudrate change request!
    Programming flash...
    Time: 00:03:47
    Flash process done.

    [ --- Customize File System --- ]
    Defeating RSA protection...
    Waiting for the phone to turn off...
    Should the communication hang, reinsert battery.
    Baudrate = 460800Bd
    Sending applet prologue...
    Sending applet body...
    Waiting for acknowledge...

    ----------------------------------------------------------

    No response
    This may indicate damaged EROM area!
    This seems pretty bad...



    what must i to do ...... please....
    thank:confused::confused::confused:

  2. #2
    Top Team Gold senter's Avatar
    Join Date
    Nov 2007
    Device
    W705
    Posts
    1,958
    Thanks
    2
    Thanked 344 Times in 283 Posts

    Re: w810i help needed

    Use XS++ v3.1 or Setool.

  3. The Following User Says Thank You to senter For This Useful Post:


  4. #3
    Recently Initiate
    Join Date
    Jun 2009
    Device
    -
    Posts
    1
    Thanks
    1
    Thanked 0 Times in 0 Posts

    Re: w810i help needed

    :):):):):):):):):):):):):):):):):):):):):):):):):) :):):):):):):):):):):):):):):):):):):):):):):):):) :):):):):):):):):):):):):):):):):):):):):):):):):) :):):):):):):):):):):):):):):):):):):):):):):):):) :):)

  5. #4
    Recently Initiate h5r0ld's Avatar
    Join Date
    Sep 2009
    Device
    -
    Posts
    6
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: w810i help needed

    brother using cruiser, follow this steps...

    1. unlock RSA
    2. flash raw FS
    3. customize
    4. flash gdfs
    5. direct unlock
    6. flash main FW

    try it for this model...:)

  6. #5
    Recently Initiate virixs's Avatar
    Join Date
    Oct 2009
    Device
    -
    Posts
    7
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: w810i help needed

    Unlock RSA nearly same with change the state to BROWN...
    After got BROWN then you can do anything with your phone.


    Thanks

  7. #6
    Recently Initiate h5r0ld's Avatar
    Join Date
    Sep 2009
    Device
    -
    Posts
    6
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: w810i help needed

    Do this steps bro...

    1. Unlock RSA
    2. Flash Raw
    3. Customize file system
    4. Direct unlock
    5. Flash Main

    try these steps first...

  8. #7
    Recently Initiate
    Join Date
    Oct 2008
    Device
    -
    Posts
    7
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: w810i help needed

    Quote Originally Posted by h5r0ld View Post
    Do this steps bro...

    1. Unlock RSA
    2. Flash Raw
    3. Customize file system
    4. Direct unlock
    5. Flash Main

    try these steps first...
    if failed
    6. Restore Firmware

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •