w810 return from the dead but still not working

[tomcom]

Hi everyone, I am new here so please bare with me...

Ever since I had my phone it has been dropping calls like crazy so I decided to debrand it after a year. I used XS++ v3.1 with W810_R4EA031_MAIN_GENERIC_HN_RED49.mbn and W810_R4EA031_FS_EUROPE_2_RED49.fbn. Everythings fine in the beginning and then after a few days it dropped call again so I decided to do it again using W810_R4EA031_MAIN_GENERIC_HN_RED49.mbn and W810_R4ED001_FS_AMERICA_2_RED49.fbn. Everything went wrong and my phone was dead. It would not turn on, no lights, no nothing. I left it charging for many hours althought I don't know if it is charging or not because it has no response. I tried it again today using the "EUROPE" one and things went smooth but did not finish. My phone will turn on now but only showing the SE logo and then stuck there. If only on charging it will give me a white screen.

Hope someone can help me here!!

Thanks


18:35:13| XS++ v3.1 (Darwin) Ready !
18:35:14| Executed on Microsoft Windows XP
18:35:24|
18:35:24| Attempting to open the interface...
18:35:24|
18:35:24| TURN OFF PHONE!
18:35:24| Hold 'C' button on phone and connect phone NOW.
18:35:24| You have 30 seconds...
18:35:24|
18:35:27| Baseband ID: 8040
18:35:27| Protocol Version: 3.1
18:35:27|
18:35:27| Sending db2010_cid00_prodid_p3l.bin...
18:35:27| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
18:35:27| This is a PRODUCTION_ID loader
18:35:27| Activating GDFS...
18:35:28| Phone name detected!
18:35:28|
18:35:28| Profiling SEMC phone...
18:35:28| Platform: DB2010
18:35:28| OTP CID: 49
18:35:28| EROM CID: 49
18:35:28| EROM Color: Red
18:35:28| IMEI: 35906300xxxxxx
18:35:28| Phone ID: W810
18:35:28| Region: EUROPE_2
18:35:28| CDA: CDA102494/4 R3A
18:35:28| Firmware Version: R4EA031
18:35:28| EROM: n/a
18:35:28| Ready for operation!
18:35:40| ~~~~~~~~~~ Custpack information ~~~~~~~~~~
18:35:40| Custpack: EUROPE_1 (CDA102494/108) (W810)
18:35:40| Generic(non-branded) custpack: Yes
18:35:40| Allowed languages: en, pt, es, fr,
18:35:40| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
18:36:14|
18:36:14| Sending db2010_cid49red_flash_r2a003.bin...
18:36:14| Applet ID: 060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
18:36:14| This is a FLASH loader
18:36:14| Now flashing firmware main...
18:36:16| Flashing c:\cid49\main generic\w810_r4ea031_main_generic_hn_red49.mbn
18:36:16| Header type: BABE
18:36:16| 344 flashblocks
18:38:59| Finishing flash
18:38:59| Done flashing
18:38:59| Now flashing filesystem...
18:39:00| Flashing c:\cid49\fs\w810_r4ea031_fs_europe_2_red49.fbn
18:39:00| Header type: BABE
18:39:00| 161 flashblocks
18:40:16| Finishing flash
18:40:16| Done flashing
18:40:16|
18:40:16| Sending db2010_cid49red_cs_r3a010.bin...
18:40:20| Applet ID: 070524 1030 AN2CXC1327364_COMPACT_SEMC_CS_LOADER__R3A010
18:40:20| This is a CHIPSELECT loader
18:40:20| Activating loader...
18:40:20| Activating GDFS...
18:41:32| This loader is UNLOCKED
18:41:32| Success! CS-loader has been unlocked!
18:41:32| Uploading customization files to phone...
18:41:32| Upload ./own_custpack/tpa/preset/custom/CONTENT_DOWNLOAD_HOOK.itm to tpa/preset/custom/CONTENT_DOWNLOAD_HOOK.itm
18:41:32| Activating filesystem
18:41:52| Creating directory tpa
19:27:55| Error: Flashing failed
19:27:55| Disconnected... Unplug the phone
19:45:58| Shutting down...

[djape48]

you are doing it all wrong, you have to match custom pack with file system. if you use europe_2 fs, then use europe_2 custom pack. try again that way

[tomcom]

Where can I download the EUROPE_2 custpack?
Is it W810_CDA102555_11_R2A_Generic_EUROPE_2 located at
Top Sony Forums > Downloads > Custom Files > w810custpack

I am planning to use
W810_R4EA031_MAIN_GENERIC_HN_RED49
W810_R4ED001_FS_EUROPE_2_RED49

[djape48]

you don't need to download, xs 3.1 has customization pack for europe 2, just pick it from the list when flashing phone

[tomcom]

Now I have a better idea. Another question is how come I have to connect my phone, while pressing c, really really fast...ie within 1/2 second after I click connect or I'll have error. Is it because my phone is not fully charged?
Anyhow I will try it when I come back. Have to leave town for a few days.

[djape48]

you really should read some tutorials. and it doesn't have to do anything with battery

[SeaMonkey]

Now I have a better idea. Another question is how come I have to connect my phone, while pressing c, really really fast...ie within 1/2 second after I click connect or I'll have error. Is it because my phone is not fully charged?
Anyhow I will try it when I come back. Have to leave town for a few days.

Before start flashing charge battery full ( It MUST be done if you don't want new problems during flashing )

[shangyi]

Now I have a better idea. Another question is how come I have to connect my phone, while pressing c, really really fast...ie within 1/2 second after I click connect or I'll have error. Is it because my phone is not fully charged?
Anyhow I will try it when I come back. Have to leave town for a few days.

You dont really have to plug in your phone while pressing c really fast within 1/2 second.

all you need to do is hold C and plug it in. Then it should be detected automatically.

[Jiggamore]

Hey guys. First time flashing my phone and it's been 2 hrs and it is still saying "sending flashblock 1/344 Address=635e1d7c Size=4f8d4d15. Been following the tutorials but no luck as to what to do here. It said it should take about 6 minutes.

17:12:54| TURN OFF PHONE!
17:12:54| Hold 'C' button on phone and connect phone NOW.
17:12:54| You have 30 seconds...
17:12:54|
17:12:59| Baseband ID: 8040
17:12:59| Protocol Version: 3.1
17:12:59|
17:12:59| Sending db2010_cid00_prodid_p3l.bin...
17:12:59| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
17:12:59| This is a PRODUCTION_ID loader
17:12:59| Activating GDFS...
17:13:00| Phone name detected!
17:13:01|
17:13:01| Profiling SEMC phone...
17:13:01| Platform: DB2010
17:13:01| OTP CID: 49
17:13:01| EROM CID: 49
17:13:01| EROM Color: Red
17:13:01| IMEI: 35906400xxxxxx
17:13:01| Phone ID: W810
17:13:01| Region: AMERICA_1
17:13:01| CDA: CDA102295/1 R2A
17:13:01| Firmware Version: R4GC010
17:13:01| EROM: n/a
17:13:01| Ready for operation!
17:13:59|
17:14:00| Sending db2010_cid49red_flash_r2a003.bin...
17:14:00| Applet ID: 060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
17:14:00| This is a FLASH loader
17:14:00| Now flashing firmware main...
17:14:00| Flashing c:\users\jamore\downloads\w810_r4ek001_main_generi c_hn_red50.mbn
17:14:00| Header type: BABE
17:14:00| 344 flashblocks

[SeaMonkey]

@Jiggamore

Your main firmware is wrong - your phone is CID49 and you trying to flash with CID50 and you have the newest firmware so if your phone working fine you no need for flashing,but if you still want to flash find firmware CID49 (MAIN,FS and CUSTPACK)