Results 1 to 2 of 2
  1. #1
    Ivan08v
    Guest

    PDA Flash & Unlock

    How to unlock SmarthPhones with Setool 3 box?

    Well to start check with Identify function (connect with @ or C depending on the phone) if the log shows this phrase: NEW SECURITY MODEL

    That will determine whether our phone is or OLD or NEW SECURITY

    Procedure:

    OLD SECURITY ....

    Don't mark anything in settings
    - Ensure with a Identify if the rest is present (if not download from the support)
    -Press Unlock / Repair
    - Connect the phone with "@" (P990, M600, etc..) Or "C" (eg the W950) as appropriate
    - Now you'll asked to install the drivers who are in the setool's folder / drivers / Smartphones_drivers
    - Expect to complete the process

    NEW SECURITY

    If you made a Identify and NEW SECURITY model was detected, here the steps:

    - Connect the phone with "@" (P990, M600, etc..) Or "C" (eg the W950) as appropriate
    - Now you'll asked to install the drivers who are in the setool's folder / drivers / Smartphones_drivers

    Open Setool
    Cost of LOGS
    -CID49: 4 logs
    -CID53: 7 logs (3 +4)

    Check "Signed Mode" in settings and fill your logs account field
    Push-Unlock / Repair

    In the case of CID53, signature calculation may take up to 72 hours
    Signatures are not calculated on weekends


    Greetings

  2. The Following 2 Users Say Thank You to Ivan08v For This Useful Post:


  3. #2
    Advanced user
    Join Date
    Aug 2008
    Device
    W890i
    Posts
    158
    Thanks
    3
    Thanked 36 Times in 22 Posts

    (TUTORIAL) Flash PDA

    SEMC PDA phones has two revisions of chips. "NEW" and "OLD".


    - "NEW" revision has changed security system and can not be made standalone.

    If you have NEW revision of Smart Phones you can do the following:

    - Free Flashing (Process PDA update files must not be checked)!

    - Flashing with SERVER - It is needed only if you want to Process PDA update files (Change CDA)!!

    - Unlock with SERVER (CSCA-based unlock). See this thread for unlocking:
    PDA Unlock - Top Sony Forums


    - "OLD" revision has just impoved security and can be breached

    !!!!!!!!!(NO ANY SERVER IS NEEDED FOR ALL OPERATIONS)!!!!!!!!!!

    - UNLOCK
    - FLASH
    - Update CDA
    - Read/Write GDFS
    - Rebuild (Change) IMEI

    INSTRUCTIONS FOR FLASHING:


    1. Download needed firmware package. For example: R3B01_CDA162007_1_ACPU_HE_Generic_World1.zip
    NOTE: Do not UnZIP this package,just LOAD IT AS IT IS!!

    2. Install drivers for flashing. For that, poweron smartphone in FW update mode.
    - for P990/M600 press and hold "@" on TURNED OFF phone, then attach DCU-60.
    - for W950 press and hold "C" on TURNED OFF phone, then attach DCU-60.
    Windows will ask you for a drivers. Drivers are in setool2\drivers\SmartphoneDrivers directory.


    3. Determine security type - press 'Identify':

    OLD SECURITY TYPE:

    Code:
    PLEASE IGNORE "PRESS POWER ON" MESSAGES !!!!
    detected MASTER on COM41, SLAVE on COM42
    Open COM port OK
    ChipID:7100,EMP protocol:0301
    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:49
    Speed:921600
    DB2000 only supports 460800,fallback.
    Flash ID check:8964
    Flash props sent ok
    OTP LOCKED:1 CID:49 PAF:1 IMEI:3593150000XXXX CERT:RED
    FLASH CID:49 COLOR:RED
    phone model: M600i
    part number: FAD-3022012-BV
    Phone part version: CXC162037 R1B01 
    organizer part version: CXC162071 R1B01 
    CDA part version: CDA162011/2 R1B01 
    CCPU part version: CXC162098 R1A09 
    USERCODE:0000

    NEW SECURITY TYPE:

    Code:
    PLEASE IGNORE "PRESS POWER ON" MESSAGES !!!!
    detected MASTER on COM41, SLAVE on COM42
    Open COM port OK
    ChipID:7100,EMP protocol:0301
    
    NEW SECURITY MODEL DETECTED
    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:49
    Speed:921600
    DB2000 only supports 460800,fallback.
    Flash ID check:8964
    Flash props sent ok
    OTP LOCKED:1 CID:49 PAF:1 IMEI:3593150000XXXX CERT:RED
    FLASH CID:49 COLOR:RED
    phone model: M600i
    part number: FAD-3022012-BV
    Phone part version: CXC162037 R1B01 
    organizer part version: CXC162071 R1B01 
    CDA part version: CDA162011/2 R1B01 
    CCPU part version: CXC162098 R1A09 
    USERCODE:0000

    4. Flash.
    - IF phone has OLD SECURITY TYPE, just press 'Flash' button.
    - IF Phone has NEW SECURITY TYPE and you want to flash it without changing CDA (Process PDA update files must be unticked), just press 'Flash' button.
    - IF Phone has NEW SECURITY and you want to update/change CDA, tick 'Process PDA update files', check 'USE SERVER FOR CSCA FLASH/UNLOCK' and press 'Flash' button.


    What is Process PDA?

    If checked CDA will be changed. Example:

    W950i with GENERIC firmware flashed with ACPU_NI_Trade_Hong_Kong without the
    "process PDA update files" tickbox, the software info screen would look something as follows:

    PDA software version:
    CXC 162088 R1B01 <-- original s/w that came with smartphone
    CXC 162101 R1B01 <-- new s/w flashed with SEtool

    CDA version:
    CDA162014/2 R1B01 <-- this was the original firmware
    CDA162017/48 R1A12 <-- this is the new firmware flashed via SEtool

    If the box is ticked, then only the last line of each section is shown - or, in other words,
    how a standard set (with the respective firmware) would be.


    This is from the Offial SETool box Help.
    Last edited by Ivan08v; 08-24-2008 at 03:42 PM.

  4. The Following User Says Thank You to Willin08 For This Useful Post:


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •