Results 1 to 1 of 1
  1. #1
    Ivan08v
    Guest

    (TUTORIAL)How to make an emptyfill?

    Guess that we have a phone in this status:

    v0.914037/UNI
    CARD SERIAL: 000XXXXX
    Loaded 51 flash descriptors
    SIGNED MODE (USING SERVER).
    Open COM port OK
    Can't load ID loader !
    PROCEDURE WAS STOPPED BY USER
    Elapsed: 37 secs.
    ChipID000,EMP protocol:0301
    erom_readvar: error reading unit 1/851
    error while reading SIMLOCK SIGNATURE unit
    phone was tampered with other software
    SECURITY UNITS CAN'T BE READ !
    DAMAGED FIRMWARE,GDFS OR EMPTY PHONE
    OTP LOCKED:0 CID:0 PAF:0 IMEI:EMPTYBOARD CERT:N/A
    IMEI MISMATCH ! GDFS IMEI:00000000000000


    erom_readvar: error reading unit 2/DBB
    erom_readvar: error reading unit 2/DE5
    erom_readvar: error reading unit 2/E15
    erom_readvar: error reading unit 2/E16
    erom_readvar: error reading unit 2/DE7
    erom_readvar: error reading unit 2/DE8
    erom_readvar: error reading unit 2/DE9
    erom_readvar: error reading unit 2/DEA
    erom_readvar: error reading unit 2/DEB
    PROVIDER: 000-00
    SIMLOCKS NOT DETECTED

    RESTORATION FILE NOT PRESENT
    "00000000000000"
    YOU MUST PERFORM FULL FLASHING
    WHEN "ALTERNATIVE SECURITY BYPASS" ENABLED

    BYPASS PACKAGE NOT PRESENT
    "00000000000000.zip"
    YOU MUST FLASH SUPPORTED FIRMWARE
    TO USE "ALTERNATIVE SECURITY BYPASS"

    var not exists
    var not exists
    var not exists
    var not exists
    SECURITY UNITS BACKUP CREATED.
    We are talking about a "Emptyboard" phone....
    Whether because we change the flash chip with a new one or because the phones are prototypes

    -In Setool2 we'll work this phones in the "Emptyfill & Repair" Tab


    SETOOL 3 BOX SUPPORTS EMPTYFILL OF DB2010/12 & DB2020
    At the time is not supported PNX5230, less DB3150 (As we shall of course)


    Steps to follow?

    DB2020


    Go to the tab "Emptyfill & Repair"

    - Select Model ...
    - Select CID49 (for all)



    -Press Recovery....

    -Add in files a GDFS in ssw format (depending on the model) and the EROM "DB2020EROM_CNV_RED52_BROWN_CID49_DB2020.ssw" that works for al the DB2020 (you can find them in the setool's folder)
    -Fill the IMEI number and check "Write IMEI to OTP"



    -Press FLASH

    When this process ends do fullflash the firmware version desired and the phone will work as a normal one....

    FOR DB2000, DB2010/12

    -Select model
    -Select CID:
    29/36 for old models
    49 for DB2010
    51 for DB2012



    -Press recovery

    -Then add in files the GDFS in ssw format and the EROM (for the model) (For DB2012 use "db2012_erom_cid51.ssw")
    (they can be found in the folder setool)
    - Fill the field of IMEI and mark the box "Write OTP"
    -Press FLASH

    When this process ends do fullflash the firmware version desired and the phone still works as a normal

    That's all
    Ivan08v

    Regards

  2. The Following 3 Users Say Thank You to Ivan08v For This Useful Post:


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •