hi...k750i .my first a temp at flashing.just getting this below.won`t connect .am i using right version of xs?
19:31:25| XS++ v3.1 (Darwin) Ready !
19:31:25| Executed on Microsoft Windows Vista
19:31:54|
19:31:54| Attempting to open the interface...
19:31:54|
19:31:55| TURN OFF PHONE!
19:31:55| Hold 'C' button on phone and connect phone NOW.
19:31:55| You have 30 seconds...
19:31:55|
19:32:27| Error: Cannot open phone communication port
19:32:29| Disconnected... Unplug the phone
19:32:32|
19:32:32| Attempting to open the interface...
19:32:32|
19:32:32| TURN OFF PHONE!
19:32:32| Hold 'C' button on phone and connect phone NOW.
19:32:32| You have 30 seconds...
19:32:32|
19:33:05| Error: Cannot open phone communication port
19:33:07| Disconnected... Unplug the phone
19:33:27|
19:33:27| Attempting to open the interface...
19:33:27|
19:33:27| TURN OFF PHONE!
19:33:27| Hold 'C' button on phone and connect phone NOW.
19:33:27| You have 30 seconds...
19:33:27|
19:34:00| Error: Cannot open phone communication port
19:34:02| Disconnected... Unplug the phone
19:34:07| Shutting down...
Results 1 to 6 of 6
Thread: xs++ won`t connect
-
08-19-2008 #1Recently Initiate
- Join Date
- Aug 2008
- Device
- -
- Posts
- 5
- Thanks
- 2
- Thanked 0 Times in 0 Posts
xs++ won`t connect
-
08-19-2008 #2Gold
- Join Date
- May 2008
- Device
- DEVIL's SE
- Posts
- 1,509
- Thanks
- 26
- Thanked 311 Times in 247 Posts
Re: xs++ won`t connect
Did you install flash driver? If you not read this USB Flash Driver Installation - Guide - Top Sony Forums
Originally Posted by azaboo2
-
08-20-2008 #3Recently Initiate
- Join Date
- Aug 2008
- Device
- -
- Posts
- 5
- Thanks
- 2
- Thanked 0 Times in 0 Posts
Re: xs++ won`t connect
im stuck again .i`m bit confused with drivers not sure iv done that bit right?.
22:25:34| XS++ v3.1 (Darwin) Ready !
22:25:34| Executed on Microsoft Windows Vista
22:27:36|
22:27:36| Attempting to open the interface...
22:27:36|
22:27:36| TURN OFF PHONE!
22:27:36| Hold 'C' button on phone and connect phone NOW.
22:27:36| You have 30 seconds...
22:27:36|
22:28:05| Baseband ID: 8040
22:28:05| Protocol Version: 3.1
22:28:05|
22:28:05| Sending db2010_cid00_prodid_p3l.bin...
22:28:05| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
22:28:05| This is a PRODUCTION_ID loader
22:28:05| Activating GDFS...
22:28:05| Phone name detected!
22:28:05| Restarting phone - please wait...
22:28:05|
22:28:05| Disconnect phone from USB-port and wait for
22:28:05| further instructions.
22:28:05| You have 10 seconds.
22:28:05|
22:28:15| Open the battery-cover and reinsert the battery.
22:28:15| Hold C Button on phone and connect phone again.
22:28:15| You have 30 seconds.
22:28:15|
22:28:29| Baseband ID: 8040
22:28:29| Protocol Version: 3.1
22:28:29| Phone has restarted successfully...
22:28:29|
22:28:29| Profiling SEMC phone...
22:28:29| Platform: DB2010
22:28:29| OTP CID: 36
22:28:29| EROM CID: 36
22:28:29| EROM Color: Brown
22:28:29| IMEI: 35784900xxxxxx
22:28:29| Phone ID: K750
22:28:29| Region: VFE_2
22:28:29| CDA: CDA102338/2 R39A
22:28:29| Firmware Version: R1AA008
22:28:29| EROM: n/a
22:28:29| Ready for operation!
22:29:36|
22:29:36| Sending db2010_cid49brown_flash_r5a.bin...
22:29:36| Prologue: Failed
22:29:36| Error: Cannot send flash loader
22:29:36| Error: Flashing failed
22:29:38| Disconnected... Unplug the phone
22:29:59|
22:29:59| Attempting to open the interface...
22:29:59|
22:29:59| TURN OFF PHONE!
22:29:59| Hold 'C' button on phone and connect phone NOW.
22:29:59| You have 30 seconds...
22:29:59|
22:29:59| Baseband ID: 8040
22:29:59| Protocol Version: 3.1
22:29:59|
22:29:59| Sending db2010_cid00_prodid_p3l.bin...
22:29:59| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
22:29:59| This is a PRODUCTION_ID loader
22:29:59| Activating GDFS...
22:29:59| Phone name detected!
22:29:59| Restarting phone - please wait...
22:29:59|
22:29:59| Disconnect phone from USB-port and wait for
22:29:59| further instructions.
22:29:59| You have 10 seconds.
22:29:59|
22:30:09| Open the battery-cover and reinsert the battery.
22:30:09| Hold C Button on phone and connect phone again.
22:30:09| You have 30 seconds.
22:30:09|
22:30:27| Baseband ID: 8040
22:30:27| Protocol Version: 3.1
22:30:27| Phone has restarted successfully...
22:30:27|
22:30:27| Profiling SEMC phone...
22:30:27| Platform: DB2010
22:30:27| OTP CID: 36
22:30:27| EROM CID: 36
22:30:27| EROM Color: Brown
22:30:27| IMEI: 35784900xxxxxx
22:30:27| Phone ID: K750
22:30:27| Region: VFE_2
22:30:27| CDA: CDA102338/2 R39A
22:30:27| Firmware Version: R1AA008
22:30:27| EROM: n/a
22:30:27| Ready for operation!
22:33:11|
22:33:12| Sending db2010_cid49brown_flash_r5a.bin...
22:33:12| Prologue: Failed
22:33:12| Error: Cannot send flash loader
22:33:12| Error: Flashing failed
22:33:14| Disconnected... Unplug the phone
-
08-20-2008 #4Gold
- Join Date
- May 2008
- Device
- DEVIL's SE
- Posts
- 1,509
- Thanks
- 26
- Thanked 311 Times in 247 Posts
Re: xs++ won`t connect
You can't flash CID 36 with CID49 firmware - and what are you try to do?
-
08-21-2008 #5Recently Initiate
- Join Date
- Aug 2008
- Device
- -
- Posts
- 5
- Thanks
- 2
- Thanked 0 Times in 0 Posts
Re: xs++ won`t connect
you got a link for right firmware?number 8 button does not work.its not the membrane.was told to try flashing it.thanks
-
08-21-2008 #6Gold
- Join Date
- May 2008
- Device
- DEVIL's SE
- Posts
- 1,509
- Thanks
- 26
- Thanked 311 Times in 247 Posts
Re: xs++ won`t connect
Read this 2 tutorials - Jdflasher CID53 update - Top Sony Forums Originally Posted by azaboo2
Using FAR+SEFP with a DB2012 DB2020 phone (Guide) - Top Sony Forums
In first find Far + Sepf to upgrade CID36 to CID49 and with second do thisLast edited by SeaMonkey; 08-21-2008 at 03:24 PM.
The Following User Says Thank You to SeaMonkey For This Useful Post:
