Page 1 of 2 12 LastLast
Results 1 to 10 of 20
  1. #1
    Advanced user
    Join Date
    Apr 2007
    Posts
    229
    Thanks
    5
    Thanked 142 Times in 44 Posts

    Tutorial on how to apply patches by using farmanager with jdflasher plug-in (db2020)

    It's useful for applying patches (over 50000 lines)

    First download far and jdflasher then copy jdflasher in far plug-in folder

    STEP 1

    1. Download a copy of your Main
    2. Place that Main in Far\Plugins\jdflaser\2020_52
    3. Drag the main into qamake.exe (I think)
    4. Let it finish. It shouldn't take more than a few seconds.
    5. Open Far Manager, press Alt-F1 and select "just da flasher"
    6. Select as phone "db2020", maximum speed and click "jump down into a large rabbit hole"
    7. As soon as it connected select "bflash"
    8. You will need to reinsert the battery 3 times (it will tell you when to do that). Don't leave your computer.
    9. As soon as it finishes, it will tell you to reflash your Main. We're going to do that now.
    10. In the right pane navigate to Far\Plugins\jdflasher\2020_52
    11. Select your main (make sure you select the .mbn file and not the .vkp file!) and click copy. In the 1st dialog don't change anything, just click copy. In the 2nd dialog make sure "flash babe image" (the 1st option) is selected and click flash.
    12. After flashing is done, select the VKP patch that is in Far\Plugins\jdflasher\2020_52 and press copy. Don't change anything on the 1st dialog again. On the 2nd dialog make sure that "Process vkp patch" is selected and click "flash". It should take a few seconds.
    13. Now you can apply any patch you want! smile.gif smile.gif
    14. After you finish, make sure you click the 3 dots ("...") and select "yes"

    Next time you want to patch your phone, you won't have to do the same things again! Before connecting your phone, select "qa2020" instead of "db2020" as your phone model. Then click bflash and jump to step 2

    step 2: Applying Patches!

    Start FAR Manager, press Alt+F1, select “just da flasher“. On the dialog select qa2020 as script (DCU-60 and 921600), click “jump down into a large rabbit-hole“. Connect the phone, holding C button. Select bflash and press Enter. On the right panel, navigate to the patch file(s) you want to write into the firmware. Select a vkp patch, press F5, press Enter on the first dialog, don’t change anything; and on the second, select “as vkp patch“, click “yeah, flash it“.
    If u want to delete patch so mark remove patch.


    You can flash several vkp patches in one go, without quitting the program. Now if you’re done, flashed everything you wanted, just select “..” on the left panel and hit Enter. On the dialog click yes.

    if it’s useful for u please click thanks
    Last edited by lavondys; 07-27-2008 at 07:20 AM. Reason: Spelling

  2. The Following 24 Users Say Thank You to marn For This Useful Post:


  3. #2
    Recently Initiate
    Join Date
    Jun 2009
    Device
    -
    Posts
    2
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: Tutorial on how to apply patches by using farmanager with jdflasher plug-in (db20

    Help plz, i have a se k810i and i tried to follow your guide but my MAIN isn't a .mbn file it's a .FBN, so qamaker won't work. i tried to flash it with another MAIn that is a .mbn but i didn't work. what shall i do? thanks in advance!

  4. #3
    Top Team Gold riders4sia's Avatar
    Join Date
    Jul 2008
    Device
    K750i - K810i - XPERIA arc - XPERIA tipo dual - Xperia Z Ultra
    Posts
    2,314
    Thanks
    21
    Thanked 282 Times in 271 Posts

    Re: Tutorial on how to apply patches by using farmanager with jdflasher plug-in (db20

    your main should end with .mbn, .fbn is the file system

  5. #4
    Recently Initiate
    Join Date
    Jun 2009
    Device
    -
    Posts
    8
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: Tutorial on how to apply patches by using farmanager with jdflasher plug-in (db20

    step 1..no.7. As soon as it connected select "bflash"..
    there no bflash if i connect using script db2020..only have oflash and ofs..so how?

  6. #5
    Recently Initiate
    Join Date
    Jul 2009
    Device
    -
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: Tutorial on how to apply patches by using farmanager with jdflasher plug-in (db20

    same problem: i have only "oflash" and "ofs"

    please help us dude :(

  7. #6
    Recently Initiate
    Join Date
    Jul 2009
    Device
    -
    Posts
    10
    Thanks
    1
    Thanked 1 Time in 1 Post

    Re: Tutorial on how to apply patches by using farmanager with jdflasher plug-in (db20

    Quote Originally Posted by eligator View Post
    step 1..no.7. As soon as it connected select "bflash"..
    there no bflash if i connect using script db2020..only have oflash and ofs..so how?
    u should not use "db2020" in far manager... u should choose "qa2020" =) then u will see bflash :)

  8. #7
    Recently Initiate
    Join Date
    Jul 2009
    Device
    -
    Posts
    10
    Thanks
    1
    Thanked 1 Time in 1 Post

    Re: Tutorial on how to apply patches by using farmanager with jdflasher plug-in (db20

    Quote Originally Posted by Shankay View Post
    same problem: i have only "oflash" and "ofs"

    please help us dude :(
    use "qa2020" dont "db2020" in far manager, then u see bflash =)
    Last edited by maakey; 07-20-2009 at 05:13 PM.

  9. #8
    Recently Initiate
    Join Date
    Jul 2009
    Device
    -
    Posts
    10
    Thanks
    1
    Thanked 1 Time in 1 Post

    Re: Tutorial on how to apply patches by using farmanager with jdflasher plug-in (db20

    i have a k530i flashed to w660i cid 53.. and i follow all these steps when im gonna apply a patch.. but when im starting bflash, it says error ?? i dunno what 2 do ? :O any one knows ? :(

    thxx

  10. #9
    Recently Initiate
    Join Date
    Jul 2009
    Device
    -
    Posts
    4
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: Tutorial on how to apply patches by using farmanager with jdflasher plug-in (db20

    you huys are just not reading it

    qa2020 is using the quick access patch

    db2020 on it is the part where you add the quick accsess patch

    if this is confusing you use setool lite 2 to add quick accses patch then come back to this and select qa2020

  11. #10
    Recently Initiate
    Join Date
    Jul 2009
    Device
    -
    Posts
    4
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: Tutorial on how to apply patches by using farmanager with jdflasher plug-in (db20



    i have this problem when i tried to flash using an jdflasher..

    i cant connect my phone..

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •