Help With PhoneXS 2 plzzzz??

[Eddie]

hey folks well its the w8101 CID49 Red and i intended to put some flash menu in it with PhoneXS. every things goes well but in last i dont know what happed with it.. its seems stucked after nearly 12 hours of Brute frocing..
and i dont know wot should do now ......should i stop and retry again or wot??

This loader is LOCKED (errorcode=30)
01:59:13| ***** Auth startup (cmd 05-50)
01:59:13| ***** AuthA (cmd 05-42) hacking
01:59:27| 1000...
01:59:41| 2000...
01:59:55| 3000...
02:00:09| 4000...
02:00:12| ...4201
02:00:12| Matches: 0:0003956, 1:000245, 2:0000, 3:0
02:00:12| Totals : 0:0240256, 1:015944, 2:0061, 3:0
02:00:12| Theory : 0:0240244, 1:015954, 2:0062, 3:0
02:00:12| ***** Reset (cmd 01-0C)
02:00:12| Waiting for the phone to disconnect
02:00:12| Waiting for the phone to reconnect
02:00:16| DBID: 8040 (db2010 Marita compact)
02:00:16| proto: 3.1
02:00:16| ***** sending PRODUCTION_ID_LOADER
02:00:16| sending loaders\db2010_cid00_prodid_p3k.bin
02:00:16| QH00 Header
02:00:16| Wait for EsB
02:00:16| Wait for EhM
02:00:16| QA00 Prologue 6532 bytes
02:00:16| Wait for EaTEbS

thats where it got stucked plzzz help me on this

any help ll be appreciated

[febousso]

If you had searched you would have found it:

It is stuck on 'EaTEbS'

This means your battery is low or dead. This is what you need to do: Exit PhoneXS. Unplug your phone. Charge it to 100% or when it says "Fully Charged". Then you have to start over. Yes, I know. You cannot "save" your progress. Hopefully, it should finish quicker the next time.

This problem can also occur on some phones that require a prodid loader, like the W810i or if the particular loader is not compatible with your phone because it was not designed for your phone. This problem has been fixed in later versions of PhoneXS. (-Thanks Lemming!)

Another thing you should try is to uncheck "Allow the computer to turn off this device to save power" in the Device manager. Do this on all "hubs" by right-clicking the hub. Click Properties, go over to the Power Management tab, and uncheck it. (-Thanks master.j!)

[erliang89]

my phone turned on by itself after the "Waiting for the phone to reconnect" part. any solutions to this problem?

[Pichu]

my phone turned on by itself after the "Waiting for the phone to reconnect" part. any solutions to this problem?

Reinstall phone USB driver, will help.

[Kwang]

I also need help on XS++ Can any one help me

[firered]

I also need help on XS++ Can any one help me

What do you want to do with xs++?