plz help... k810 is dead what can i do ?

[MeiramAdel]

plz anybody help me i used a patch on my phone k810 and after finishing the telephone didnt switch on ..and i have the backup file ..what can i do with it ???????

[senter]

Must use Setool.

1. Reinsert battery and do NOT turn on phone!
2. Start Setool and click Identify
3. Hold 2 and 5 together and in the meantime put the USB cable.
When hear that sound (though that connects USB flash memory) disconnect USB cable, reinsert battery and do NOT turn on phone!
4. Start XS++ v3.1 and click Connect.
5. Hold "C" button in the meantime put the USB cable.
6. Flash only Main, then again disconnect USB cable, reinsert battery and now can turn on phone - work fine as before.

[MeiramAdel]

i didnt understand the 6 step ... what is flash only main ???

[lavondys]

there are three main files you need to flash your phone:

Main

FS

and Custom.

You NEED to install these and they have to be correct and matching in order for your phone to work.

If you can hook your phone upto XS++ and copy the log back into this post then we wil point you in the right direction.

You can find the relevant files in our download section.

Regards

Lav

[senter]

i didnt understand the 6 step ... what is flash only main ???

After repair of EROM must flash Main.

[MeiramAdel]

thnxxxxxxxxxxxxxxxxxxxxxxx it worked really thnx.... but patches are bad for mobile or i used it worng ?

[senter]

thnxxxxxxxxxxxxxxxxxxxxxxx it worked really thnx.... but patches are bad for mobile or i used it worng ?

It depends, but in most cases is not fatal nothing you can do with the patch, because flash Main - remove all patches.

[lavondys]

Question Answered. Thread Closed.