VKP Patches - how to install them?

[SiLeNt_hUnTeR]

I made .VKP patch file for my W800. How can I install it?

[Pichu]

Enter FAR / FLASH folder and copy vkp file to memory (F5 key).

[Spaztikdude]

Dragging the VKP file to the FAR plugin side works too, I believe.

[kavior]

You can also load it into firmware when You sliding it with GSlide...

[SiLeNt_hUnTeR]

Thank you!
Every patch i had before was a .bin file

[kavior]

hmph.. patch ever had *.vkp... ;)

[phoneey]

so I just have to download the vkp patch and copy it to the FAR/FLASH folder, which should be in c: of the phone right??

[borislee]

I made .VKP patch file for my W800. How can I install it?

what do you mean made?how can you make a patch ?what kind of patches did yo made?

[Doruka]

Where I find patches for w800?

[gregagre]

here are they [Only registered and activated users can see links]

[OWIES]

the way depend on your mobile model, sometimes is needed to use FAR with SEFP plugin, sometimes GSlidie... many difrent ways

[Haghdadi]

Would you please clarify how to install a path on W800i ?

[abderian2004]

one can use far manager or gslide to install or uninstall .vkp patch.
far manager is recomended by most of the people

[Kojot]

When u add any patches do u need to add them in a spesific folder or just copy to the memory

[ryanchow]

For my phone, when i install the .vkp patch. The phone will stay the desktop and doesn't have any response. Why is it happen?

[refresh]

does the patch match ur firmware...Patches are firmware compatible

[friciu]

I really don't know how to install patches on my k750(cid 36 red).
I was copy on flash folder of my phone but nothing happened....wherw I must copy the .vkp files with far manager?

[wisky_2004]

dose any 1 have patches for k310?

[ryanchow]

that's the secret....I search a suitable patch na
it seems that only have the k300

[saeidmac]

how i can Patches w800i walkman 1.0 to walkman 2.0
thanks

[ghia84]

Use gflash it's very easy to use.

[FREAKed]

he could use gflash if that was possible, but you cannot patch walkman 1.0 to 2.0 because it cannot be done. you can only aplly patch called sysgfx to put walkman 2.0 skin on your phone

[wisky_2004]

K310 patches any 1??? ... how to??? no? nothing ;((

[Sanket]

HOw to use vkp patch on w700i?

[krunal80]

is there any way to install a .vkp patch using xs++ :confused: ??????

[wisky_2004]

Anyone Can Post A Totorial On How To Make A Fking Patch??? Pls :)

[ncharan85]

Can somebody post on how to install .vkp patches on a K750i(CID49) modded to W800i(CID49) R1BC002..
In Detail



ThanXXX:confused:

[FREAKed]

use search button, but most patches are made for cid 36 firmware so if you already modded you cell ten you had to ise gslide and there you have an option in which you choose patches before sliding. put some patches, only in main, slide it and flash main. there you go

[crish]

I made .VKP patch file for my W800. How can I install it?
hey --------------------

[TaiPan]

i recommand GFlash... it's very simple to use;) i think it's better than Far...

[ZirrrO]

for me after a glide telephone is not included, and far does not want patched. sorry for my bad english

[FREAKed]

i recommand GFlash... it's very simple to use;) i think it's better than Far...

actually only with far you have insight in what you are doing, but it is for little more advanced users

[galas]

thx dude.....

[x445352]

where i can download gflash?

[csky888]

when I enter FAR, do I have to first flash the fake MAIN using XS++ ?? or I can just directly enter far?

[drgre]

how i can Patches w800i walkman 1.0 to walkman 2.0
thanks

Not posible! You'll have to buy a new phone :)

[chandu_k75]

when I enter FAR, do I have to first flash the fake MAIN using XS++ ?? or I can just directly enter far?

if ur CID is 49 then u have to flash with fake main. if u r cid is 36 then u directly connect to FAR manager.

[chandu_k75]

where i can download gflash?

here u go [Only registered and activated users can see links]

[koarksee]

thanks very much

[ejderkaan]

thank you:D

[seking]

see the tutorial section buddy

[coolredkap]

Does anyone have a all in one patch for w700i R1CA021

[sanal47]

U can install them by selecting .vkp file and adding it in misc section of setool and when it prompts press no to apply and yes to remove this worked for me

[gse7en]

Use setool2lite is more easy than others, just browse the *.vkp files in MISC files and press "write script" follow the instruction, then press no to apply or yes to remove

[andylihaha]

Use setool2lite is more easy than others, just browse the *.vkp files in MISC files and press "write script" follow the instruction, then press no to apply or yes to remove

thanks for your info :)

[Pardoon]

Use setool2lite is more easy than others, just browse the *.vkp files in MISC files and press "write script" follow the instruction, then press no to apply or yes to remove


thanks for sharing it trying it now

[gse7en]

Click thanks button. Don't try to thank someone in your post. Or your post will be analyzed as spam.

Correct me if i'm wrong.

[kogutowicz]

I install patches by using setool2 LITE I thking is the best program to install *vkp patch.

[brazuka]

Patches are applying for vkp w200 or someone has news of when will work ... Perhaps need wait another firmware one CID53

[salehrtc]

what are these patchs do ? can any body tell me about VKP ?

[Norby C.]

Have a question, 1st how can install patches with XS++ and will W810 patches work on a K800/10?
Thanks in advance!

[pikitsan]

You can't install patches with xs++,maybe in other versions you'll can do it,and no patches from w810i are not working on k800@k810.

[asmodeusss]

XS++ 3.1 has a menu for applying patches, but it doesn't work yet...:(... I've heard that the next version will support this option... I think it'll work if you apply patch to firmware, and then flash it with XS++ to your phone.

[bachen007]

keypad password :cool:for my w810i I made .VKP patch file for my W810i.but i dont know to installit How can I install it using xs++?[/QUOTE]

[LmAn`]

keypad password :cool:for my w810i I made .VKP patch file for my W810i.but i dont know to installit How can I install it using xs++?
Don't you read?
You cannot apply patches with XS++. Only with SETool and JDFlasher.
I recommend you to use JDFlasher.

[Ali12]

you can install with setool2lite_1.11 using "quick access" patch