How to get access to all the folders on your UIQ3 phones

[jasmin]

Written by Mr. Thunderbird from SE-NSE.

NOTE: I'm not responsible for damaged/broken phones.

First off all, download all the files we need.

1 - Sony Ericsson PC Suite for SmartPhones.

Download here ([Only registered and activated users can see links])

2 - UIQ3 Pack

Download here ([Only registered and activated users can see links])

OK, let's start!

1. Install the downloaded software in the following order.

Sony Ericsson PC Suite For Smartphones
Python-2.5.1 (If asked to restart computer, restart it)
Win32-py2.5
Pyserial-2.2.win32

2. Place the "1.py" file into your C:\ drive (on computer).
3. Install APP TRK on your phone (Install it on PHONE MEMORY).
4.1. Connect your phone to your computer in 'Normal Mode' or 'Phone Mode.

[Only registered and activated users can see links]

4.2. Wait while SE PC Suite sync with your phone.

[Only registered and activated users can see links]

4.3. There should also be an M-Router icon in your system tray.

[Only registered and activated users can see links]

5. Go To 'START' Right-click 'MY COMPUTER' and then 'MANAGE'.

[Only registered and activated users can see links]

6. Navigate to 'DEVICE MANAGER' and then look at which PORT your phone uses 'Sony Ericsson XXXX Application Port (COMX).

[Only registered and activated users can see links]

7. Go to C:\ Right-click the file, then 'OPEN WITH', 'CHOOSE PROGRAM', NOTEPAD.

[Only registered and activated users can see links]

[Only registered and activated users can see links]

8. Press 'CTRL-F' and search for the line 'ser = serial.Serial'.

[Only registered and activated users can see links]

9. As you saw on my screenshot, my W960 uses the port '4', then I -1 it so I have '3', edit the file 1.py to match your port -1.

[Only registered and activated users can see links]

10. Save the changes.

[Only registered and activated users can see links]

11. ON YOUR PHONE, start the TRK APP.

[Only registered and activated users can see links]

11.2. IF you are not connected, go to settings and change the port to '1'.

[Only registered and activated users can see links]

12. On your COMPUTER, go to C:\ and double click the 1.py file...

[Only registered and activated users can see links]

13. Then it should exit without waiting for user input.. That's normal..

[Only registered and activated users can see links]

14. Done! Now you will have access to all the files in C:\ and RO(Read-Only) on Z:\!
Use a file manager like SWISS Manager or X-Plore to access the files.
After restarting the phone, protection will be on again, connect the phone to PC and just run the 1.py file again.

OR! Use Caps Switch! [It's in the .RAR file I uploaded above]
Install it in this order:
1. Upload the patched TRK APP driver to C:\sys\bin.
2. Install Caps Switch.
3. Run Caps Switch and then you can turn on/off the protection of files without the use of computer!

"OR! Use Caps Switch! [It's in the .RAR file I uploaded above]
Install it in this order:
1. Upload the patched TRK APP driver to C:\sys\bin.
2. Install Caps Switch."
I got it to work by installing the cap switch and upload the patch after installation.

i.e

OR! Use Caps Switch! [It's in the .RAR file I uploaded above]
Install it in this order:
1. Install Caps Switch.
2. Upload the patched TRK APP driver to C:\sys\bin.


Thanks goes to Mr. Thunderbird from SE-NSE for this guide.


Nice day

[AlienStar]

please help me
I've did every thing and the protection was off . but when I restart P1i It become on.
and I used Caps Switch and turned off the protection ..also when I restart P1i
the protection become on
please ......

[jimmydanny]

As far as I can see, if you restart it WILL put the protection back on, so you should NOT restart it, but access the files before u restart

[allan92]

there is a new way to acces the private folders just check this thread Uiq modifications! - Top Sony Forums ([Only registered and activated users can see links])

THREAD CLOSED