Kriomag CamDrivers...

[Kriomag]

--= Thx to Cheng Rong, Andeo, Raiderski, lpachuong =--


Kriomag_v21.93_BETA

[Only registered and activated users can see links] ([Only registered and activated users can see links])

FEATURES:

- Driver File Size: 16kB
- Based on 7.7 Final
- Filtering Disabled (for maximum sharpness)
- Now Zoom works with Manual Focus! (Turn Macro ON and set focus, turn Macro OFF and set Zoom)
- Light CC (remove yellowishnes - only in FINE Mode)
- Adjustable Saturation
- Quick WB Change
- 2 Photo Modes (Picture Quality NORMAL: 7.7 Final and MF, Picture Quality FINE: 7.7 Final + Automatic EM/ENM/LedEM/LedENM and MF)
- 3 Video Recording Modes - HIGH QUALITY Normal Mode ~200kbps - (Normal Mode max 15fps, Night Mode max 10fps, Night Mode + Macro= max 5fps)
- Large JPEG Files in Day Mode, ~92%, file size ~600kB, 89% in Night Mode (Normal & Fine Picture Quality)
- Manual Focus with Zoom Preview and SPOT (Macro ON: 1.0 Autofocus, Manual Focus Range 1.1-4.0 with Zoom preview, 1.1 = Infinity, 4.0 = Macro)
- 2 Zoom Modes (Smooth Linear x16 for NormalMode Video, Linear x4 for NightMode Video & Photos)
- AE Lock


INSTRUCTIONS:

Saturation or Quick WB:
Turn macro ON.
- EV: 0.0 = Auto WB + Default Saturation, EV 0.0
- EV: -0.3 to -2.0 = Saturation
- EV: +0.3 to +2.0 = White Balance (0.0 Auto WB, +0.3 WB Lock, +0.7 Alternate Auto WB)

Manual Focus:
Turn Macro ON.
When in range 1.1-4.0 (+/-) click half-shutter for zoom preview (you can ON/OFF zoom preview by clicking half-shutter),
now (when zoom is on) you can adjust focus very precisely (+/-), when picture is most sharp you can:
- press shutter to take picture with SPOT (very useful with macro shooting)
or
- click half-shutter again (the zoom will go off and SPOT will be disabled)
and now press shutter to take picture. enjoy!

2 Photo Modes:
Picture Quality NORMAL:
- Normal Mode / Night Mode = 7.7Final
- Normal Mode / Night Mode + Macro = 7.7Final with Manual Focus

Picture Quality FINE:
- Normal Mode / Night Mode = Enhanced Mode / Enhanced Night Mode
- Normal Mode / Night Mode + Macro = Enhanced Mode / Enchanced Night Mode with Manual Focus



I use W800i_R1BD001 Firmware.

Sample Photos:

[Only registered and activated users can see links] ([Only registered and activated users can see links])
[Only registered and activated users can see links] ([Only registered and activated users can see links])
[Only registered and activated users can see links] ([Only registered and activated users can see links])
[Only registered and activated users can see links] ([Only registered and activated users can see links])
[Only registered and activated users can see links] ([Only registered and activated users can see links])
[Only registered and activated users can see links] ([Only registered and activated users can see links])

[spiiinky]

wich phone and firmware do you have?

[Kriomag]

Driver works on K750/W800/W810 (with all firmwares, i think ;)).
I have K750@W800 R1BC002 :)

[spiiinky]

so it doesnt matter if you have cid36 or cid49 it gives the same results?

[Kriomag]

This version was tested on esato forum and no problems with cid36/cid49

[spiiinky]

ok i will try it now and see how it works. will post pics later

[Kriomag]

if you want i can prepare test driver:
Macro OFF = Default Colors
Macro ON = CC
Its good if you dont know what versiot to choose, you can do 2 pics and compare... then you will know which version is better for you (with or withou CC :D).

[gedas]

Kriomag you could prepare such driver so that we could choose either to take pictures with CC or without. great idea.

however i've got one question to you. when i upload camdrivers to my w810i CID49 they work fine but when i upload them to k750i also CID49 and try to open camera lens it goes back to menu and it isn't possible to take pictures at all. so i also have to go back to standard 5.3 camdriver on k750i. what could be the problem? it seems to be a bug but how to fix it?

thanx Kriomag

[gedas]

by the way Kriomag i have just looked at your camdriver in Far...and you don't mention CC anywhere...is it really there? :)

thanx for doing great job anyway!!! :)

[Kriomag]

try driver from second link... :)

[k2bi]

is ur driver better than 8.5X
and does it just seem to me or video quality is way better?

[Kriomag]

Kriomag you could prepare such driver so that we could choose either to take pictures with CC or without. great idea.

however i've got one question to you. when i upload camdrivers to my w810i CID49 they work fine but when i upload them to k750i also CID49 and try to open camera lens it goes back to menu and it isn't possible to take pictures at all. so i also have to go back to standard 5.3 camdriver on k750i. what could be the problem? it seems to be a bug but how to fix it?

thanx Kriomag
i prepared test version only... you can disable CC by enabling macro

And your problem looks like no camdriver is uploaded to phone :/ when you delete driver = camera wont start (go back to menu)

[Kriomag]

is ur driver better than 8.5X
it depends on what do you expect from it ;)
my driver is very simple in use, 8.5x is hard in use :)
In my driver ENM is from 8.54, AE Lock from 8.53, CC from 11 Pilya's etc. Base is 7.7 Final with some tweaks.

I have 3 Video Recording Modes :D
...and no profiles! i dont like profiles, i like zoom where it should be (+/-) ;)

[PSS]

Hi man !!! I use your driver .... Video Very Good !!! but is the photo good as 8.53 ? i dont know. in which is CC better then driver without it ?

thank´s man ... but good work ...

[Kriomag]

in which is CC better then driver without it ?
i dont know, i leave choice to you :) thats why i've made test version, you can disable and eneble CC and see the difference for your self :) (see first post for link)

[PSS]

And man if you change the function of macro then i can't do photo from little distance ? or the function of macro is still the same as in default camdriver ?

Thank´s

[Kriomag]

i 've made 3 versions
Kriomag
Kriomag + CC
Kriomag + CC (only when macro off - for testing purposes only...)

When you enable macro in test version you have normal macro (without CC) then you can shootnormal pictures and compare them with macro off (CC) :) i thought my driver is simple... lol

[spiiinky]

i've tried your driver, its good and the cc works good and sometimes better witout it, but I think Zuza gives better colors. maybe you can do the same driver but with zuza. 7.7 is better for k750 and Zuza better for W800.

[PSS]

i 've made 3 versions
Kriomag
Kriomag + CC
Kriomag + CC (only when macro off - for testing purposes only...)

When you enable macro in test version you have normal macro (without CC) then you can shootnormal pictures and compare them with macro off (CC) :) i thought my driver is simple... lol
LOL ok i try it and see :)

[gedas]

Kriomag so what can i do to upload properly camdriver to k750i so that it worked properly? i have been using Far for a long time to mod my w810i but then i started trying it on k750i because i also wanted it to be moded. i added Toshara's acoustics today and they work fine. that means that the they were uploaded properly. but then i tried camdriver and it fails to take pictures... :( you've been in this camdriver modding business for a long time so maybe you could suggest a solution?...

thanx

[Kriomag]

7.7 is better for k750 and Zuza better for W800.
hmm :/ k750 & w800 have exactly the same hardware :)

Kriomag so what can i do to upload properly camdriver to k750i so that it worked properly? i have been using Far for a long time to mod my w810i but then i started trying it on k750i because i also wanted it to be moded. i added Toshara's acoustics today and they work fine. that means that the they were uploaded properly. but then i tried camdriver and it fails to take pictures... :( you've been in this camdriver modding business for a long time so maybe you could suggest a solution?...

thanx
i suggest you try PhoneXS++ for camdriver uploading :) it works fine for me... but im using patch that redirects driver to Phone Memory: Other\drv and now i can upload driver with MyPhoneExplorer :D

[spiiinky]

ok, but i have a k750 and a w800, on my k750 the 7.7 works better and on my w800 the is not as good as the zuza is. maybe it depends on firmware

[PSS]

Man i try all configurations of your camdriver and i must say without CC is better.

Use : Kriomag CC selected

1st : Macro : off (CC)
Mode : Fine (spot off)

2nd : Macro : on (CC disabled )
Mode : fine (spot off)

3nd : Macro : off (cc)
Mode : normal (spot on)

4nd : Macro : on (cc disabled)
Mode : normal (spot on )


i think the 2nd photo is better then others.

what you say ?

:)

[Kriomag]

thats why im using version without CC ;) lol
but sometimes CC is way better :/ now i have to figure out how to make CC selectable for all modes... just in case :)

ok, but i have a k750 and a w800, on my k750 the 7.7 works better and on my w800 the is not as good as the zuza is. maybe it depends on firmware
it must depend of different parts :/ my brother has same k750 as i but totally different photos on same driver :) lol

[k2bi]

so the first version is the best (whitout CC)

[qwerty12]

great i will be trying now

[gedas]

thanx Kriomag i'll try once again with FAR and then if it doesn't work i'll try with XS++...

by the way...it's so nice to see all the best modders like you Kriomag, qwerty12 and the others coming here to TOP SONY to visit us...the users of your products... :)

i hope you'll never get bored tuning your phones! keep it real! :)

[myfoxz]

yup yup nice work man, wil giv a try now!
keep it up....

Erm, wanna ask, is it i can zoom 16x without switching to any supercam mode?

[myfoxz]

here to report u some bugs,when in camera mode - macro ON, night ON...Switch to video recorder will hav some display problem, night OFF now wil make the phone restart...

K750 @ w800 cid49 here

And i wan to ask tat, 16x zoom only do in video mode?
When i zooming, there stil display 4.0x, is it actually its already in 16x zoom?

[Kriomag]

here to report u some bugs,when in camera mode - macro ON, night ON...Switch to video recorder will hav some display problem, night OFF now wil make the phone restart...

K750 @ w800 cid49 here

And i wan to ask tat, 16x zoom only do in video mode?
When i zooming, there stil display 4.0x, is it actually its already in 16x zoom?
yep... you are first one who found this bug (except me :))... i tried to fix this for days but no success :( but i'll keep trying

yes, zoom should be x16 when displays x4

yup yup nice work man, wil giv a try now!
keep it up....

Erm, wanna ask, is it i can zoom 16x without switching to any supercam mode?
yes, zoomx16 is default

[k2bi]

i have little bit different O.O
macro ON, night OFF -> no problems when switching to video mode.
macro ON, night ON -> phone restarts when switching to video mode :)
very ugly bug
but still.... gd driver (Y)
PS: i got into video mode (macro ON and night ON), everything was ok, i went out of camera to standby and entered camera again. camera was still in video mode (macro ON and night ON) and phone restarted. after reboot i went again into camera and again restart :D, few times more and i managed somehow to get out of video mode :p

[Kriomag]

W810i v4.5 - Kriomag Mod

- ENM/LedENM
- 3 VR Modes
- Smoother Preview on Viefinder
- AE Lock
- SPOT Support
- Zoom x16 (Smooth Linear Zoom only for VR in Normal Mode)

[Only registered and activated users can see links]

[myfoxz]

i have little bit different O.O
macro ON, night OFF -> no problems when switching to video mode.
macro ON, night ON -> phone restarts when switching to video mode :)
very ugly bug
but still.... gd driver (Y)
PS: i got into video mode (macro ON and night ON), everything was ok, i went out of camera to standby and entered camera again. camera was still in video mode (macro ON and night ON) and phone restarted. after reboot i went again into camera and again restart :D, few times more and i managed somehow to get out of video mode :p

same thing wif me~~

its ok kriomag, take ur time...v jus want a simple, easy to use cam driver..

And something to ask, is tat any possibility to make a 16x zoom shot at 2mp?

[k2bi]

same thing wif me~~

its ok kriomag, take ur time...v jus want a simple, easy to use cam driver..

And something to ask, is tat any possibility to make a 16x zoom shot at 2mp?

my camera has always max quality settings (2mp). i can always zoom 16x :p

[Kriomag]

Base driver: v4.5(W810i)

- ENM/LedENM
- 3 VR Modes
- Smoother Preview on Viefinder
- AE Lock
- SPOT Support
- Manual Focus (1.0 Auto Focus, 1.1 Focus to Infinity, Manual Focus Range 1.2-4.0)
- No Zoom (at all...) - i will try implement it later but it's very hard (Manual Focus & Zoom = @#$%@#$%@#% [Only registered and activated users can see links])

[Only registered and activated users can see links]

[SpiderX]

I was wondering what version is this? I saw a 6.0 Kriomag on Esato somewhere and I used it for a while.

[k2bi]

Base driver: v4.5(W810i)

- ENM/LedENM
- 3 VR Modes
- Smoother Preview on Viefinder
- AE Lock
- SPOT Support
- Manual Focus (1.0 Auto Focus, 1.1 Focus to Infinity, Manual Focus Range 1.2-4.0)
- No Zoom (at all...) - i will try implement it later but it's very hard (Manual Focus & Zoom = @#$%@#$%@#% [Only registered and activated users can see links])

[Only registered and activated users can see links]

going too complicated :D i tried it
hmm.. so zoom :(
i still prefer ur first driver (7.7 - whitout CC) :cool:

[Kriomag]

I was wondering what version is this? I saw a 6.0 Kriomag on Esato somewhere and I used it for a while.
its version without number ;) i've made so many drivers i lost count ;)

going too complicated :D i tried it
hmm.. so zoom :(
i still prefer ur first driver (7.7 - whitout CC) :cool:

i know :( i will try to implement zoom tomorrow... today i spent over 5 hours to make this driver working :)

[Kriomag]

here to report u some bugs,when in camera mode - macro ON, night ON...Switch to video recorder will hav some display problem, night OFF now wil make the phone restart...

K750 @ w800 cid49 here

And i wan to ask tat, 16x zoom only do in video mode?
When i zooming, there stil display 4.0x, is it actually its already in 16x zoom?

Problem fixed! :D no more phone restarts when entering camera in ENMvr :D
(link at first page updated :))

[k2bi]

yay, it really works :D
thx, keep up gd work (Y)

[gyuszi]

can you modify k510 camdriver? those pics with this driver was amazing... i found a driver for my phone and it makes 26 fps videos in 128*96 but if i make better pics ill use your driver

[dioragry]

can u change the x16zoom to just x4 or x8 zoom?
coz the picture quality of x16zoom is very blur.
thx..

[k2bi]

can u change the x16zoom to just x4 or x8 zoom?
coz the picture quality of x16zoom is very blur.
thx..

yea, digital zoom is bad, optical would be better :)
but u dont have to use full zoom, u can always just zoom half way lol:rolleyes:

[Khaba]

good quality, those pics. that is a w810i, right?

[Kriomag]

Kriomag v20.0

- Base driver v4.5 (W810i)
- ENM/LedENM
- 3 VR Modes - fixed! (NormalMode=15fps, NightMode=10fps, EnhanceNightMode=5fps)
- Smoother Preview on Viefinder
- AE Lock
- SPOT Support (Normal Mode = SPOT ON, FINE Mode = SPOT OFF)
- Manual Focus (1.0 Autofocus, 1.1 Focus to Infinity, Manual Focus Range 1.2-4.0)
- Manual Focus + Macro = Super Manual Focus (zoom x8 for preview - half-press shutter ON/OFF)
- JPEG 89% (for Normal & Fine)
- still no zoom (at all...)

[Only registered and activated users can see links] ([Only registered and activated users can see links])

Instruction for Super Manual Focus:
When in range 1.1-4.0 once half-press shutter for zoom preview - now you can change focus (+/-) with fine tuning [Only registered and activated users can see links] half-press shutter again to preview all picture, press shutter for shot [Only registered and activated users can see links]

PS. Still cant get zoom working for VR... [Only registered and activated users can see links] Chengrong help me! [Only registered and activated users can see links]

[k2bi]

cooool
but i think i still stick to 7.7 and AF :D

[Kriomag]

cooool
but i think i still stick to 7.7 and AF :D

AF? my v20.0 has AF as default - manual is only when change to 1.1-4.0 (+/-) :)

[k2bi]

damn, didnt notice that :p
and it would be great if you could manage to add somekinda zoom too (Y)

[Kriomag]

damn, didnt notice that :p
and it would be great if you could manage to add somekinda zoom too (Y)
i know... its damn hard, i cant get it working properly... :(

[dioragry]

or maybe something like the old supercam would be nice, when camera started its in normal mode, then press >*<<*<* to activate ure good camera driver.
and maybe speeding up picture taking in night mode would be good. btw, i would like to ask why does it become so slow? is it because of the ENM?

[Kriomag]

Hello!

Kriomag v21.0 (donors: 4.5, 8.53, 8.54, 7.7 Final)

- ENM/LedENM
- 3 VR Modes - fixed! (NormalMode=15fps, NightMode=10fps, EnhanceNightMode=5fps)
- Smooth preview on Viefinder
- AE Lock
- SPOT Support (Picture Quality: Normal Mode = SPOT ON, FINE Mode = SPOT OFF)
- Manual Focus (1.0 Autofocus, 1.1 Focus to Infinity, Manual Focus Range 1.2-4.0)
- Super Manual Focus (Manual Focus + Macro: once half-press Shutter for Zoom x8 Preview ON/OFF)
- JPEG 89% (for Normal & Fine Picture Quality)
- Advanced Zoom (x4 for Photos & NightMode VR, x16 Smooth Linear for NormalMode VR, NO Zoom for ENM VR)


[Only registered and activated users can see links] ([Only registered and activated users can see links])


Instructions for Super Manual Focus:
When in range 1.1-4.0 once half-press shutter for zoom preview - now you can change focus (+/-) with fine tuning half-press shutter again to preview all picture, press shutter for shot. enjoy! :)

[PSS]

Hello!

Kriomag v21.0 (donors: 4.5, 8.53, 8.54, 7.7 Final)

- ENM/LedENM
- 3 VR Modes - fixed! (NormalMode=15fps, NightMode=10fps, EnhanceNightMode=5fps)
- Smooth preview on Viefinder
- AE Lock
- SPOT Support (Picture Quality: Normal Mode = SPOT ON, FINE Mode = SPOT OFF)
- Manual Focus (1.0 Autofocus, 1.1 Focus to Infinity, Manual Focus Range 1.2-4.0)
- Super Manual Focus (Manual Focus + Macro: once half-press Shutter for Zoom x8 Preview ON/OFF)
- JPEG 89% (for Normal & Fine Picture Quality)
- Advanced Zoom (x4 for Photos & NightMode VR, x16 Smooth Linear for NormalMode VR, NO Zoom for ENM VR)


[Only registered and activated users can see links] ([Only registered and activated users can see links])


Instructions for Super Manual Focus:
When in range 1.1-4.0 once half-press shutter for zoom preview - now you can change focus (+/-) with fine tuning half-press shutter again to preview all picture, press shutter for shot. enjoy! :)
Man your drivers come really hard to use not like on first site the 1.st driver :))

And you say the 8.53 is hard . Remember ?

I use the first driver and they are good is not necessary to do all the version.

PsychoSpooky !

[k2bi]

yay, zoom too :p
but yea, its gettin too complicated.

[Kriomag]

new version, see first page :)

[dioragry]

maybe something like the old supercam would be nice, when camera started its in normal mode, then press >*<<*<* to activate ure good camera driver.
and maybe speeding up picture taking in night mode would be good. btw, i would like to ask why does it become so slow? is it because of the ENM?

[colombia]

Hello!

Kriomag v21.2 (donors: 7.7 Final, 8.53, 8.54)

- Base Driver: 7.7 Final
- ENM/LedENM (NightMode + Macro / NightMode + Macro + LED)
- 3 VR Modes - fixed! (NormalMode=15fps, NightMode=10fps, EnhanceNightMode=5fps)
- Smooth preview on Viefinder
- AE Lock
- SPOT Support (Picture Quality: Normal Mode = SPOT ON, FINE Mode = SPOT OFF)
- JPEG 89% (for Normal & Fine Picture Quality)
- Advanced Zoom (x4 for Photos & NightMode VR, x16 Smooth Linear for NormalMode VR, NO Zoom for ENM VR)
- Manual Focus (Macro ON: 1.0 Autofocus, 1.1 Focus to Infinity, Manual Focus Range 1.2-4.0)
- Super Manual Focus (Macro ON: When in Range 1.1-4.0: once half-press Shutter for Zoom x10 Preview ON/OFF)


[Only registered and activated users can see links]


Kriomag v21.3 (donors: 7.7 Final, 8.53, 8.54, Pilya's CC)

- Base Driver: 7.7 Final
- ENM/LedENM (NightMode + Macro / NightMode + Macro + LED)
- 3 VR Modes - fixed! (NormalMode=15fps, NightMode=10fps, EnhanceNightMode=5fps)
- Smooth preview on Viefinder
- AE Lock
- SPOT Support (Picture Quality: Normal Mode = SPOT ON, FINE Mode = SPOT OFF)
- JPEG 89% (for Normal & Fine Picture Quality)
- Advanced Zoom (x4 for Photos & NightMode VR, x16 Smooth Linear for NormalMode VR, NO Zoom for ENM VR)
- Manual Focus (Macro ON: 1.0 Autofocus, 1.1 Focus to Infinity, Manual Focus Range 1.2-4.0)
- Super Manual Focus (Macro ON: When in Range 1.1-4.0: once half-press Shutter for Zoom x10 Preview ON/OFF)
- Color Correction - thx Pilya!


[Only registered and activated users can see links]


Sample Photos:

NightMode:
[Only registered and activated users can see links] ([Only registered and activated users can see links])

ENM = NightMode + Macro:
[Only registered and activated users can see links] ([Only registered and activated users can see links])

NightMode + LED:
[Only registered and activated users can see links] ([Only registered and activated users can see links])

LedENM (Nightmode + Macro + LED):
[Only registered and activated users can see links] ([Only registered and activated users can see links])



Without CC:
[Only registered and activated users can see links] ([Only registered and activated users can see links])

With CC:
[Only registered and activated users can see links] ([Only registered and activated users can see links])




escuse my english but not perfect yet jejej. my question is what is the C.C feature in the kriomag 21.3??

[k2bi]

@colombia
as it says:
- Color Correction - thx Pilya!

[colombia]

ok but i cant see that. this a feature or a fuction how activate it?

other question, i have a 7.7final, 8.53, 8.54, 9.90, and kriomag 21.3. what is the better camdriver ??

[k2bi]

as far as i know its always ON in 21.3. there isnt no CC in 21.2
(btw. i prefer version whitout CC)

[colombia]

ok the 21.2 camdriver is better??
men im cant understand y already install the 21.3 but i cant see a superirity. i think what the 9.90 is much better. what do you think??

[k2bi]

21.1 better? - look here [Only registered and activated users can see links] , i think that CC deforms too much colors.
i havent tried 9.9

[colombia]

ok men take this.

[csky888]

for the normal night mode and the nightmode with macro, can't we just turn on night mode and macro?? without the camera driver? wouldn't it be the same?

[colombia]

hi guys, i have a question, what version is better the 21.2 or 21.3, i cant see any diference.. that C.C feature.. how work in the camera?

[k2bi]

as i said, 21.2 i better for me coz it hasnt CC, 21.3 has it, CC is only difference between those drivers.

[colombia]

i used a 8.53 camdriver, what do you think about this driver?? is the best choise?? or the 21.2 is better.

[k2bi]

hmm...
dont know :p
i used that too but i changed it to 21.2

[Kriomag]

new version :D see first page.

PS. sorry i haven't answered questions... usually im on esato forum :)

[k2bi]

and its getting even complicated :p

[colombia]

new version :D see first page.

PS. sorry i haven't answered questions... usually im on esato forum :)


hey bro. what changes offer the new camdriver?? is better?

[cell_freak]

Kriomag Buddy..ur cam driver is great,but I think the shutter time or what ever u call it is a bit too much,so it takes a bit longer to take the photos,& it's hard to keep the mobile steady for a long period of time,resulting in a messed up photo.Try lowering the delay of the shutter time thingy..so that the pictures r taken as soon as the capture button is pressed!But,I must say,urs is the most impressive camdriver in my observation.Thank u,MAN!

[abderian2004]

thats great.....
i will check this and see.

hello friends
which one is the latest and best cam driver.
with fast shutter speed.ands better cc.
with better VR

[avalon]

For W810 Sarmad's v4.5 based drivers are better.
For W800/K750 Kriomag ones. V21.6 is the latest.
You can find them in the esato boards: topic is about supercam.

AvaloN

[csky888]

for W810i user, is this better or the Super Cam 8.4?? or any other one that is good? I want smoother photos browsing. and i also was less laggy night mode, because when I am in nightmode, even a slight movement will blur the picture

[Eddie]

in my opinion Kriomag v21.7 is far better than others, i have tried the others but wasnt satisfied atall ,this one Easy to Use, better Pictures better Quality if u know how to use it

[kavior]

I think, that Yours new camdriver is the best I ever had!

PS. Are You from Poland? ;) Pozdro z Polski :D

[csky888]

I have just tried version 21.7 and I seriously don't see the difference between that and the original...maybe I just don't know how to work it

how come there's no zoom? it only blurs when +/-

[GSpotter]

i first tried 21.6 yesterday, and now upgraded to 21.7... the difference to the original driver is amazing, but i think there's one big flaw (or i'm missing something)... when macro + nightmode are ON, how can i make zoom ??


keep up with the good work

[Kriomag]

new version, see page 1 :D
pozdro z Polski :D hehe

[k2bi]

cool but why you spammed all the posts with that 21.8 driver????
and what about CC in 21.8??

[Kriomag]

cool but why you spammed all the posts with that 21.8 driver????
and what about CC in 21.8??
i want to make my driver more popular? sorry... ;)
i removed CC, i use only wb profiles and they works fine for me :) peace!

[DJ X2]

the best driver is original serial driver

[Kriomag]

the best driver is original serial driver
if you say so... ;)

[PSS]

Man hi !!! I have one of first version of your drivers (based on 7.7) . and is greate !!!! but now you don´t created a drivers but something like 8.52 driver. very hard to use. !!! man if you cant add ENM mode from 8.53 to this driver that be very good !!! And the drivers become to be the best !!!

Thank´s !!!

[AquaZX]

the best driver is original serial driver

Did you try Kriomag's modification?

I doubt you did. It is best what you can get from this camera..IMHO.

[darknight]

you not kreate more kamdrives kriomags ??

[kyprios1]

Kriomag can you keep up an alternative version of your drivers with CC please?
I always get greenish pictures without it.

[dioragry]

maybe u can take away the manual focus on ure next driver. its kinda confusing and takes quite some time to get used to and take quite some time to focus too. btw, can u do speedup ENM and speedup daylight? coz when i try to secretly snap pictures, all the pics will be blur coz the person moves.

so i would really like the next driver to have speedup ENM and speedup daylight without manual focus and AF back, witout manual focus.

and another question is how can i use zoom with manual focus?

[navy614]

the v21.8 is pretty well.
when will the v21.9 be uploaded?hah!
where are your drivers first uploaded?here or esato?

[stam91]

Is there any improved cam driver for k310i (R4EA031) ?? I hate those standard drivers!

[AquaZX]

Am I only one who has problem taking indoor clear picture with kriomag 21.8 driver..?

[se_k750i]

wow :) it's really good! I can't see any noise :) congratulations :)

[gnas24h]

Driver works on K750/W800/W810 (with all firmwares, i think ).
I have K750@W800 R1BC002

[firstknigh]

wow :) it's really good! I can't see any noise :) congratulations :)

no noise? can share you pic so can see the result?

[Kriomag]

here are pictures: [Only registered and activated users can see links]

[kavior]

no noise? can share you pic so can see the result?

hmph... every k750 is the same, but other. one making photos better, second - worse :;)

[Kriomag]

yes but... in default driver you often get iso 400-800 so there is a lot of noise and no colors... in my driver iso100 is forced in low light conditions = no noise and good colors :) (but ofc longer exposure time so its easy to get blurry picture ;) - if you dont like this you can turn off enhanced mode by selecting Normal Picture Quality and you will get default - noisy - pictures :))

[ahsm]

Hey guys, I just flashed my K750 to a W800! But, I am having trouble finding out how to change the camdrivers. Could someone point me in the right direction?

I just used XS++ and it says this under the service menu of my K750:

Camera SW versioins
Camera
Current 21.9

Does this mean that I succesfully installed the Kriomag 21.9 camdrivers?!? :D!

[chandu_k75]

[QUOTE=ahsm;17013]I just used XS++ and it says this under the service menu of my K750:

Camera SW versioins
Camera
Current 21.9

Does this mean that I succesfully installed the Kriomag 21.9 camdrivers?!? :D![/QUO

yes u succesfully installed the Kriomag 21.9 camdrivers.

[csky888]

is 21.9 better than the previous version?

[ryanchow]

when will you release a new driver?

[ladykiller]

can it run on K550i and K800i?
thx

[gautam]

camera wont start after I restart my phone...I have K750i@W800i R1BC002 CID49...

[amarsidhu]

"Picture Quality NORMAL:
- Normal Mode = Normal Mode with Zoom x4
- Normal Mode + Macro = Normal Mode with Super Manual Focus
- Night Mode = Night Mode with Zoom x4
- Night Mode + Macro = Night Mode with Super Manual Focus

Picture Quality FINE:
- Normal Mode = Enhanced Mode with Zoom x4
- Normal Mode + Macro = Enhanced Mode with Super Manual Focus
- Night Mode = Enhanced Night Mode with Zoom x4
- Night Mode + Macro = Enhanced Night Mode with Super Manual Focus"

Can someone explain this in brief. I am getting these points but i am not sure that i am doing it right or not.

Thanks.

[Sebi1768]

so i must switch off macro and nightv. to zoom and when i have some enogh i switch it on again and then its still to that where i have zoomt?

[depeha]

hey guys. can someone edit this cam driver? [Only registered and activated users can see links] If can be zoom with 1,3MPX, faster video(can be 17fps) lower jepg compresion(higher kvality).

It is driver for w550/w600

[Sebi1768]

so i must switch off macro and nightv. to zoom and when i have some enogh i switch it on again and then its still to that where i have zoomt?

[ElemonGW]

Well I have a problem. I don't know if it is a problem with my phone (W810i) or if i don't do/understand sth correctly (this seems to be more probable :) ) but when in range 1.1-4.0, with macro turned on and having clicked half-shutter (which means that I am previewing with zoom) and I press shutter (not half-shutter of course) then first it goes back (with no zoom) and after it takes the picture. What am I doing wrong???

[blankito350]

i used the kriomag... i cant use zoom with MACRO mode on ... its just zoom in and zoom out.. rapidly... so it doesn't take the photo with zoom.. because when i pressed the to take the pic.. it zoom out very fast ... to normal, so in conclusion the zoom with MACRO mode doesnt work for my w810..im using right now 7.7final

[DjBeNNeTT]

Finally found this driver! lol.
Will try it out and post my result pictures of the 21.9 to see how good i can do it lol

[symbchris]

When you have a new driver bro Kriomag update us once away . Your camera driver is the best I have tried so far. There were bugs in the ealier version but the new ones were having less one. Version 21.9 woks good. You rock man...

[joeldsouza]

great driver....
really loved it but... it blurs sometimes...

[aburiciu]

i tried kriomag 21.91 and Sarmad 5.7...and kriomag driver has too much noise indoor, but Sarmad works better

[depeha]

Does exist some kriomag camdrivers for w550???... or better question: is it possible to create better camdrivers as default?

[xechan]

its good driver but can't compatible with my phone. it creates problem some times camra can't start.

[Sebi1768]

i found the 9.94 driver much better for w800 !!!

[snk316]

which is the best camdriver for k750i given that i use it mostly for indoor shooting.plz help...there are many many diff versions.which 1 is best indoors??

[andrewsbr]

@Kriomag
you have the intention to make to driver in supermode?

[samrajpal]

hi guys,i have w810i with kriomag 21.9 ,the problem is that when my phone is in night mode it takes 6-7 seconds to save the image after 6-7 sec it shows saving,where as daylight scene can be captured within 1-2 sec ,so is there any way to minimize the shoot time,thnx in advance

[nrk_jegan]

hi,after updating kriomag's 21.9 version driver i'm not able to take photos.
while clicking the camera shutter, camera application is quiting to main menu..
I'm using w800i R1BC002...
Plz help to resolve this...

[amarsidhu]

this is the best driver i have used till date
sarmad 5.7 is also good.
but its enm should be as fast as spu

[aburiciu]

hi guys,i have w810i with kriomag 21.9 ,the problem is that when my phone is in night mode it takes 6-7 seconds to save the image after 6-7 sec it shows saving,where as daylight scene can be captured within 1-2 sec ,so is there any way to minimize the shoot time,thnx in advance

it's because of the exposure time....if it would be less than 6-7 seconds the photos would come out with a lot of noise

[burnmail12]

why speed is this drivers ? isnt it slow ?

[frankie]

Which is the best driver for a w800 firmware written on a k750 phone cid 49?

[burnmail12]

and which is the best on w810i ?

[aburiciu]

try it for yourself....between Kriomag 21.91 (works for both specially for k750, w800) or Sarmad 5.7 (specially for w810i)

[andrewsbr]

and which is the best on w810i ?


Here you it will be able to find some comparisons between drivers
[Only registered and activated users can see links]

[sweet_anku]

i think the kriomag 21.9 is the best,sarmads 5.7 is good for night shots

[ali_power42]

is there a cam driver that makes the video better?
higher frames

[samrajpal]

whats the difference to super driver?
super driver is fully manual driver u can use 6 or 7 scenes by pressing +- volume keys ...............

[refreesh]

any tutorial i dont know how to do that :) pls

[newtoncarl]

This drive works in w900 ?

[paladinzluka]

newtoncarl ([Only registered and activated users can see links])No, it doesn't work on 900.
([Only registered and activated users can see links])

[heresing]

Great job, I use your driver. I got very good vdo but I can't take picture with manual focus, always blur.

[heshamo]

thanx alot for the driver i will try it :)

[abderian2004]

really thanx for the driver kriomag,itz really good

[foggy4966]

its not working on my k750

[foggy4966]

the zoom doesnt work

[jenzy]

This driver is very good thank you :)

[horton]

I'm using the original cam driver. Is there really a big difference in quality? Because my current one is too NOISY and I hate to see my brother's k750i camera shots are better than mine. pls help.

[ali_power42]

kriomag 21.9 has 4 versions so if you have problem with one of them try another with more compatiblity to your phone
in night mode it has very low noise specialy within led

[samrajpal]

I'm using the original cam driver. Is there really a big difference in quality? Because my current one is too NOISY and I hate to see my brother's k750i camera shots are better than mine. pls help.
yes.theres the difference between original drivers and modified drivers,mostly the modified drivers has improved sharpness,and reduced noise which can be realize in night shots,u can try kriomag driver 21.9 or samrad's 5.7

[hubisiowy]

Any1 was thinking anything about changing VGA drivers? I know it sounds funny but i think it is really possible to increase the framerate as in other models. To change k310i camdriver which has VGA camera shoud be easy :? I tried to change some things in colours, and i saw effects, but to get better i shoud have a year to test. But to increase the framerate, i think 15 min is needed. Can any1 say me which line of text, and how shall I change to manipulate the number of framerate ? (by the knowledge in k800i/k750i).

[ZirrrO]

to my mind the best camera drivers LengStreet 34.2 or 55.5

[sarej]

BIG thx to Cheng Rong and Andeo

Kriomag v21.9

- Driver File Size 18kB
- 7.7 Final Based
- 2 Shooting Modes (Picture Quality NORMAL: Default 7.7 Final, Picture Quality FINE: 7.7 Final + Automatic EM/ENM/LedEM/LedENM)
- W900 JPEG Settings 87% (for Normal & Fine Picture Quality)
- Super Manual Focus (Macro ON: 1.0 Autofocus, Manual Focus Range 1.1-4.0 with Zoom preview, 1.1 = Infinity, 4.0 = Closest Macro)
- 4 Zoom Modes (Smooth Linear x16 for NormalMode VR, x6 for NightMode VR, PQ Normal: x4 for Photo, PQ FINE: x2 for Photo)
- AE Lock
- EM/ENM Support WB Profiles (also with LED)
- SPOT for Super Manual Focus (when Zoom Preview is enabled)

[richrach]

any new driver for k800i ?

[alphahobo]

I've been able to get Kriomag 21.8 for W810 CID49, but I have a CID50 phone and I was wondering if it was compatible?

[Aurelio]

i think it is, y also have a cid50 and im using one for cid49

[nitroblu]

how does this camera driver on thw w810i compare to zuzu3's camera driver (in terms of ease of use, quality of picture, features, and overall funtionailty)?

[master123]

what about w700i, is it work?

[mstanciu]

i changed my w810 camera driver to kriomag and i'm very pleased. very nice photos at night. great focus..

[styllerpro]

Kriomag, have u any driver (camera) for w300? thanks

[brazzukas]

Kriomag, have u any driver (camera) for w300? thanks

w300

v2.85 BrAzUkA .zip - DivShare ([Only registered and activated users can see links])

[abmadman]

hey..
does anybody have cam drivers for W550i APArt from the one that has K600's driver with W550's power sequence?
And ya any tutorial/ guide or any clue on how cam drivers are editted?
Thanks mate.

[catalintit]

this driver is amazing!!! i tested on my w810 and the photos si very very clear!!! thx

[dioragry]

i love your v21.9
super clear pics!

[arn0ld]

can i use this camdriver for w900i

[jasmin]

K750/W800/W810 Camera Driver with Super Manual Focus.

You can tried. But if you do, then report if it works.But I think this is only for k750/w800/w810.

Nice day

[arn0ld]

i tried to upload kriomag's camdriver and my camera worked with CID 49 and CID 49 other but camera worked very bad on CID 49 and good on CID 49 other (i deleted all file in camera cam0 cam1 cam2 and then uploaded kriomag's cam0. is that right ?

[Kriomag]

hello world!
Im back to modding k750i/w800i/w810i camdrivers :)
Check my last drivers at:


[Only registered and activated users can see links]
([Only registered and activated users can see links])

[diabolic22]

which cam driver is for the 580i
thx ahead for helpinh

[Kriomag]

which cam driver is for the 580i
thx ahead for helpinh
i really don know :/ i have only K750i :)
Use search or google ;)

[jasmin]

which cam driver is for the 580i
thx ahead for helpinh

Look here:

w580i cam driver ([Only registered and activated users can see links])

Nice day

[asmodeusss]

I don't really understand why do i get overexposed pictures with kriomag's drivers. I've tried 21.8 and 21.93 :(

[Kriomag]

I don't really understand why do i get overexposed pictures with kriomag's drivers. I've tried 21.8 and 21.93 :(
You have CID49 Camera Module = CRAP :)
My brother has also CID49 cammodule and he get overexposed pictures too...
Lately i've changed cammodule to new CID36 ("new" - from broken cid36 k750i but with untouched camera module) :)
Pictures are v good quality, no overexposure, zoom works with full resolution and i can change saturation :D

[CyberAndy]

camera wont start after I restart my phone...I have K750i@W800i R1BC002 CID49...

i think that ur fw have a problem.. u should flash fw 4 ur fone and try to mod this cam driver again.. it works well in many fone that i tried..

[k2bi]

Kriomag_v21.93_BETA camdriver is really good but.... umm, how do I say it in english... shutter is opend too much time, if I move my hand while taking pic I get easily blurry pic.
If I remember correctly then this bad "feature" began with v21.9.
:(

[stam91]

k2bi, agree with you. And the second little inconvinience: pictures are sharp, but the objects' edges are too aliased... em... like a saw )
I hope these features will be fixed in next versions of this high-end driver.

[93bh]

Which w810i camdriver is the best?

I want to know.